Your automotive lift and equipment source.
My Account
Shopping Cart
Product Search
Products
Above Ground Lifts
Wheel Service Equipment
Jacks, Stands, Presses, and Cranes
Fluid Service
Exhaust
Parts Washers
Compressors
About Us
Testimonials
Contact Us
Financing
Shipping Policy
To hear about our inventory blowouts on our extensive line of automotive lift and equipment products, submit your email address below.
Home
>
Wheel Service Equipment
>
Ranger CRT380R 8 Sensor Wireless Computer Alignment System
Computer Wheel Alignment System
click here for special pricing
Our Price:
$12,490.00
Description
The Ranger® CRT380R Alignment System is a highly accurate, four-wheel, wireless alignment system for domestic and foreign cars and trucks. It features 8-CCD technology, Bluetooth® data transfer and our refined ProSpec® Alignment software that was designed for simplicity and speed.
All alignment steps from start-to-finish are clearly shown with vibrant animation and graphics providing a faster, more profitable and far easier to understand alignment procedure. This unique combination of user-friendly functionality and ease-of-use enables any business owner interested in providing alignment service as an additional profit source to do so with a minimal investment and training. ProSpec® software includes the essential software tools to perform fast, accurate alignments with factory results. It’s easy to use, consistent and precisely-measurable, and requires minimal supervision. Technicians proceed easily and receive immediate feedback and correction. Simplistic read results enable you to also identify potential problem areas specifically related to suspension components.
ProSpec® software was designed to give your wheel alignment service the best possible efficiency. It gives you the option of selecting the most effective measuring routines before starting wheel alignment procedures. Standard option for a program-guided routine with initial and final measurements - rapid procedure for measurements without caster steering angle and/or runout compensation - or free measurement for checking individual values as required.
The Ranger CRT380R aligner combined with ProSpec® results-driven software guarantees:
Increase in bottom line revenue
30 percent average increase in read-rate accuracy
Fewer costly re-reads and investigations
Decline in come-backs and customer complaints
Check out the following features that make the Ranger CRT380R Wheel Aligner your best choice:
8-CCD Wheel Sensors
Deliver greater speed and improved range for accurate results
Cordless Bluetooth® sensors remove hassle of connecting cables
On-sensor controls permits users to operate selective computer software functions from any wheel location eliminating the need for countless return trips to the console
Greater speed, improved range and accuracy and quick, precise measurement readings
Instantaneous wireless data transfer as far away as 200-feet between sensors and CRT380R aligner
Tough polymer casings and sturdy construction reduces potential damage to sensitive sensor components
Contamination-proof touch-pad controls
Improved ball-bearing actuators for precise pendulum movement
Automatic battery-charging docking stations built right on the cabinet sides keeps sensors charged and ready at all times
Sleep-mode function during vehicle adjustment periods to preserve battery life
On-screen displays alert alignment technician of possible sensor adjustments required for precise, accurate readings
Long-life 7.2 volt NiMH* batteries provide a full day of continuous operation
*Nickel Metal Hydride (NiMH) is the next generation of rechargeable batteries that emerged after NiCd (Nickel-Cadmium Battery). They use hydrogen absorbing alloys in their negative electrode (anode) and nickel oxide in their positive electrode (cathode). NiMH batteries are more environmentally friendly than NiCd, and offer much greater battery capacity per volume than NiCd. Another major advantage of NiMH over NiCd is their ability to accept a charge at any time without suffering from "memory effect”.
What is 8-CCD?
Power is supplied to the measurement sensors by built-in rechargeable batteries. The alignment values are determined with optical measurement using CCD line cameras (Charge-Coupled Devices) and 4 infrared light sources in each measurement sensor. There is a camera in the main housing, a second on the boom. Each CCD camera is illuminated alternately by 2 IR light sources; this requires a skewed position of the CCD lines in the cameras by 45" with respect to both light beams. One light source inside the camera beams directly from above onto the CCD line. This light source is built into a pendulum and handles the measurement of camber and steering axis inclination. The second light beam falls from the opposite measurement sensor in the horizontal direction onto the same CCD line and handles the measurement of the toe angle. The CCD camera line is divided into 1024 adjacent segments. From the beam intensity on the different segments, it is possible to calculate the beam deflection and thus the corresponding angle. Here an upstream lens that reduces the point-shaped light beam to a line and the ability of the downstream camera electronics to detect the lightest area of the light line achieve high precision. The individual control procedures and data streams are transmitted between the measurement sensor and the receiver in the equipment cabinet via infrared.
The 8-CCD wireless measuring sensor system consists of 8-CCD cameras which are fitted within the horizontal sensors (toe) and vertical sensors (camber and angle of steering inclination). As shown below, the 8 sensors form an enclosed 360° measurement field.
What is Bluetooth?
Bluetooth is a completely different way to form connections between the wheel sensors and the aligner computer. You can think of it as a cable- replacement technology that uses the 2.4 GHz (ISM) band. With Bluetooth you don't need to do anything special to initiate communications – the devices find each other automatically and start conversing without user input.
Signals are omni-directional and can even pass through walls. The devices don't need to be perfectly aligned and don't need an unobstructed line of sight. Bluetooth devices use a combination of the Personal Identification Number (PIN) and a Bluetooth address to identify other Bluetooth devices. The transmission scheme (FHSS) provides another level of security in itself. Instead of transmitting over one frequency within the 2.4 GHz band, Bluetooth radio transmission uses fast frequency-hopping spread spectrum (FHSS) technology, allowing only synchronized receivers to access the transmitted data so that interference from other RF sources is highly unlikely. Both Bluetooth and WLAN can co-exist within the same environment.
Aluminum alloy for light weight handling
Rugged construction
Heavy duty chrome rods with nickel-plated screw
Extended 4-point clamping tips with thin profiles that fit a variety of custom wheel profiles
Inside and outside tip positioning
ProSpec® Alignment Software
Specially designed for ease of use, speed and helpful technician feedback
Choose from 3 individual alignment procedures:
Standard start-to-finish computer guided program
Quick readings without caster steering angle and/or run-out compensation
Free range measuring for checking individual readings as required
Screen displays include:
Front and rear axle readings
Front and rear toe (also "super toe" > toe out on turns)
Front and rear camber (-15º to 15º)
Front caster (-28º to 28º)
Individual caster, camber and toe
Front and rear setback, SAI and thrust angle, included angle
Elevated 3 Point or rolling run-out compensation
Elevated adjustments
Individual zoom readings allows operators to clearly see screen and software function from any wheel position
Customer database with customer notes and comments
Before and after adjustment readings
Visual vehicle adjustment help
ProSpec® software is available in multiple languages. Check for current language availability.
Optional yearly specification and software updates are PC network available or by simply installing a new program cartridge.
Help Menu
User-Friendly Time-Saving Features
Superior screen graphics with vibrant animation and displays that deliver a dazzling visual and instructional experience.
Alignment functions and measurements are controlled via the wheel sensors, mouse and/or keyboard.
Self-explanatory graphic user surface provides simple understanding
Compatible with low ride-height vehicles or those with ground-effects
Self-centering wheel-clamp adaptors cover an extended range of vehicles
Cordless Bluetooth® sensors remove hassle of connecting cables
Technician has the option to customize alignment units of measure, accuracy, language, etc.
Technician has a choice of rolling or lifted runout modes
Features self-diagnostic help screen and system information
On-sensor controls permits users to operate selective computer software functions from any wheel location eliminating the need for countless return trips to the console
Continuous checking ensures accurate toe measurements.
On-screen display indicates if sensor leveling is required
Vehicle adjustment illustrations and multiple adjustment bar graphs
Adjustment illustrations provide illustrated diagrams and instructional information of recommended OEM adjustment methods
Valuable customer information can be conveniently stored in the database allowing shop personnel to quickly reference previous alignment work orders
Convenient “spoiler setting” adjustments on the wheel-clamps for accommodating blocked front or rear line-of-sight of the sensors and provides accurate toe measurements
"Before” and “after” measurements can be printed in full-color to explain service and record work performed
Standard Equipment
Full-sized, sloped keyboard for easy use. Provides user-friendly control of all alignment procedures.
Dell® OptiPlex 330® PC with powerful Intel® Core2 Duo 1.60 Ghz processor provides high-powered processing with low-power consumption.
Genuine Windows® XP Operating System
Intel® Graphics Media Accelerator
8 USB Ports (2 front, 4 back, 2 internal)
Dell 17” E178FP Flat Panel LCD Monitor designed for complete comfort and convenience with 1280x1024 pixels resolution for sharp and brilliant images of text and graphics. Offers wide viewing angle of 160° horizontal and vertical
Mobile rolling cabinet with integrated storage.
Steering wheel lock.
Brake pedal depressor.
Canon ® PIXMA iP1800 color printer
Computer mouse.
Console keyboard.
Current year domestic and foreign car vehicle specifications
Comparable unit will be supplied if unavailable at time of purchase
All supported by round-the clock Dell Technical Support
Optional
• Sensor calibration fixture
Equipment Specifications
Cabinet: 40” Width x 27” Depth x 50” Height
Power Requirements: 115V / 1Ph, 50/60 Hz / 8 amp - 230V / 1Ph, 50/60 Hz / 8 amp
Related Products...
Tire Changers
Our Price:
$1,395.00
Add
Tire Changers/Wheel Balancers
Our Price:
$2,595.00
Add
Laser Wheel Alignment System
Our Price:
$4,995.00
Add
Tire Changers
Our Price:
$1,595.00
Add
Tire Changers/Wheel Balancers
Our Price:
$3,495.00
Add
Share your knowledge of this product with other customers...
Be the first to write a review.
Browse for more products in the same category as this item:
Wheel Service Equipment
Wheel Service Equipment
>
Wheel Alignment
Ranger CRT380R 8 Sensor Wireless Computer Alignment System
$12,490.00
About Us
Contact Us
Privacy Policy
Terms of Use
Help
Category Index
Product Index
Copyright © 2006 American Automotive Equipment All Rights Reserved.
Site by:
Indextree
